Return to site
Return to site

Edge Fusion Software

broken image


Click on the button below to download the Fusion software.Software is compatible with all Insight CS/CTS and CS2/CTS2, Evolution CS/CTS and CS2/CTS2, and Attitude CS/CTS and CS2/CTS2 products.Legacy Evolutions software is only compatible with Evolution versions 3 and up.EVOHT customer need to use the EVOHT software to update products. Download Fusion. Download MyStyle. Download Spark Updater. Download Update Agent. Download Ignition Updater for Mac. Download CS/CTS Drivers. Download Evolution Drivers. Download Superchips Spark Drivers. Download SlimDX for data log playback.

Overview

Without the right FaroArm® USB driver installed on your computer, the FaroArm®, ScanArm®, Design ScanArm, or FARO® Gage might not work correctly. When FARO® releases new firmware or software, you may have to upgrade the driver.

Edge Fusion Software Not Working

CAUTION: When your FaroArm comes back from factory servicing or recalibration, plan to update the driver before you use it. As stated in your FARO license, the factory provides the most recent hardware improvements when servicing your FaroArm, so updating the driver may be required.

Time to Complete15 minutes
Skills Needed
  • Knowledge of Windows at the operating system level
  • General computer skills
Prerequisites
  • Internet connection
  • Computer you use with the FaroArm®, ScanArm®, Design ScanArm, or FARO® Gage
  • Storage media for saving files, such as a flash drive
  • Download for the driver you want to install
CompatibilityClick herefor details about which Microsoft Windows version supports different driver versions computer processors.
Supported Software

CAM2®, Measure 10.x, Measure Q, Measure X, Measure 4.x

Supported Hardware
  • FaroArm--FARO® QuantumS,Quantum M, FARO® Edge, FARO® Arm Fusion, FARO® Arm Prime, Platinum, Quantum, Titanium, Advantage, Digital Template
  • ScanArm Edge or Design ScanArm with FARO® Laser Line Probe (LLP)--Blu HD, HD, ES, V3
  • Gage--Gage Bluetooth, Gage Plus, Gage Standard, Power Gage

Quick Steps

Uninstall the Existing Driver

  1. Ensure that there are no applications open that may be communicating with the FaroArm®, ScanArm®, Design ScanArm, or FARO® Gage. If so, save work in open programs or files and close them.
  2. Turn off and disconnect the FaroArm from any Ethernet, USB, wireless, or Bluetooth computer connection.
  3. There are two ways to uninstall the existing driver.

Method 1 - Control Panel

  • You can access the Control Panel by opening the Start Menu and searching for Control Panel in the search box.

You can also access the Control Panel by pressing Windows Key + i and searching for Control Panel in the Windows Settings Panel.

Edge fusion software download
  • In the Control Panel window, select Uninstall Program
  • Find and click the FARO USB Driver entry in the program list. Write down the number that appears in the Version column on the right. Select the Uninstall option.
  • Click Yes in the permissions window.

Method 2 - Apps and Features

  • You can access the Apps and Features Panel by pressing Windows Key + X and clicking the Apps and Features item.

You can also access the Apps and Features Panel by pressing Windows + i and clicking the Apps and Features Panel in the Windows Settings Panel.

Software
  • In the Apps and Features Panel, click the FARO USB driver program. Write down the Version number that appears under the program title and select Uninstall.
  • Click Uninstall in the pop-up window.

Install the New Driver

  1. Before you begin this procedure, ask your IT department to temporarily disable antivirus software on the computer you use with the FaroArm®, ScanArm®, Design ScanArm, or FARO® Gage. Antivirus software may cause the driver installation software to fail when extracting the driver files.
  2. On the computer, navigate to where you saved the FaroArm USB Driver .exe file. Write down the four decimal-place version number at the end of the file name (x.x.x.x).
  3. Double-click the file and when the window appears, click Yes to allow the installation to continue.
  4. In the wizard window, select the language the wizard should use, then click Next in this and the next window. This installation process begins. This might take a few minutes depending on your processor speed.
  5. Click Next in the wizard welcome window.
  6. When the installation is complete, click Finish.
  7. Go to the Start Menu to Shutdown the computer.
  8. Connect the FaroArm®, ScanArm®, Design ScanArm, or FARO® Gage to the computer using an Ethernet, USB, wireless, or Bluetooth connection and turn on the device.
  9. Start the computer. You should see a message in the system tray stating the driver was successfully installed.
    If the new hardware wizard appears, select This Time Only, then Recommended Options and click Finish.
  10. Go to Confirm Results to continue.

Confirm Results

Check that the FaroArm USB Driver appears in the Control Panel.

  1. Access the Control Panel. It may take a few seconds for the programs list to appear.
  2. Browse the list to find the FaroArm USB Driver <#> and notice that the number in the Version column has changed to be the same as the one at the end of the new driver's file name.
  3. Click to close the Control Panel.

Your device is ready to use.

Back to top

Quick Steps

Uninstall the Existing Driver

You use the Windows Control Panel to uninstall the driver. Uninstalling the driver removes it from Windows, leaving the driver file on the hard disk--just in case you may need it in the future.

Video

In this 1-minute YouTube video, learn how to use the control panel to uninstall an example program called Bonjour. Just substitute FaroArm USB Driver <#> for Bonjour. Restricted from viewing YouTube? Click here for private viewing.

Edge Fusion Software Update

Detailed Steps

  1. Ensure that there are no applications open that may be communicating with the FaroArm®, ScanArm®, Design ScanArm, or FARO® Gage. If so, save work in open programs or files and close them.
  2. Turn off and disconnect the FaroArmfrom any Ethernet, USB, wireless, or Bluetooth computer connection.
  3. On the computer, go to Start > Control Panel > Programs > Programs and Features. It may take a few seconds for the programs list to appear.
  4. Browse the list to find the FaroArm USB Driver <#>.
  5. Write down the number that appears in the Version column on the right.
  6. Right-click on the driver name, click Uninstall, and click Yes in the next two windows. The driver is removed from the program list.
  7. Click to close the Control Panel, then go to the Start Menu to Restart the computer.
  8. Go to Install the New Driver to continue.

Install the New Driver

  1. Before you begin this procedure, ask your IT department to temporarily disable antivirus software on the computer you use with the FaroArm®, ScanArm®, Design ScanArm, or FARO® Gage. Antivirus software may cause the driver installation software to fail when extracting the driver files.
  2. On the computer, navigate to where you saved the FaroArm USB Driver .exe file. Write down the four decimal-place version number at the end of the file name (x.x.x.x).
  3. Double-click the file and when the window appears, click Yes to allow the installation to continue.
  4. In the wizard window, select the language the wizard should use, then click Next in this and the next window. This installation process begins. This might take a few minutes depending on your processor speed.
  5. When the installation is complete, click Finish.
  6. Go to the Start menu to Shutdown the computer.
  7. Connect the FaroArm®, ScanArm®, Design ScanArm, or FARO® Gage to the computer using an Ethernet, USB, wireless, or Bluetooth connection and turn on the FaroArm.
  8. Start the computer. You should see a message in the system tray stating the driver was successfully installed.
    If the new hardware wizard appears, select This Time Only, then Recommended Options and click Finish.
  9. Go to Confirm Results to continue.

Confirm Results

Edge Fusion Software
  • In the Control Panel window, select Uninstall Program
  • Find and click the FARO USB Driver entry in the program list. Write down the number that appears in the Version column on the right. Select the Uninstall option.
  • Click Yes in the permissions window.

Method 2 - Apps and Features

  • You can access the Apps and Features Panel by pressing Windows Key + X and clicking the Apps and Features item.

You can also access the Apps and Features Panel by pressing Windows + i and clicking the Apps and Features Panel in the Windows Settings Panel.

  • In the Apps and Features Panel, click the FARO USB driver program. Write down the Version number that appears under the program title and select Uninstall.
  • Click Uninstall in the pop-up window.

Install the New Driver

  1. Before you begin this procedure, ask your IT department to temporarily disable antivirus software on the computer you use with the FaroArm®, ScanArm®, Design ScanArm, or FARO® Gage. Antivirus software may cause the driver installation software to fail when extracting the driver files.
  2. On the computer, navigate to where you saved the FaroArm USB Driver .exe file. Write down the four decimal-place version number at the end of the file name (x.x.x.x).
  3. Double-click the file and when the window appears, click Yes to allow the installation to continue.
  4. In the wizard window, select the language the wizard should use, then click Next in this and the next window. This installation process begins. This might take a few minutes depending on your processor speed.
  5. Click Next in the wizard welcome window.
  6. When the installation is complete, click Finish.
  7. Go to the Start Menu to Shutdown the computer.
  8. Connect the FaroArm®, ScanArm®, Design ScanArm, or FARO® Gage to the computer using an Ethernet, USB, wireless, or Bluetooth connection and turn on the device.
  9. Start the computer. You should see a message in the system tray stating the driver was successfully installed.
    If the new hardware wizard appears, select This Time Only, then Recommended Options and click Finish.
  10. Go to Confirm Results to continue.

Confirm Results

Check that the FaroArm USB Driver appears in the Control Panel.

  1. Access the Control Panel. It may take a few seconds for the programs list to appear.
  2. Browse the list to find the FaroArm USB Driver <#> and notice that the number in the Version column has changed to be the same as the one at the end of the new driver's file name.
  3. Click to close the Control Panel.

Your device is ready to use.

Back to top

Quick Steps

Uninstall the Existing Driver

You use the Windows Control Panel to uninstall the driver. Uninstalling the driver removes it from Windows, leaving the driver file on the hard disk--just in case you may need it in the future.

Video

In this 1-minute YouTube video, learn how to use the control panel to uninstall an example program called Bonjour. Just substitute FaroArm USB Driver <#> for Bonjour. Restricted from viewing YouTube? Click here for private viewing.

Edge Fusion Software Update

Detailed Steps

  1. Ensure that there are no applications open that may be communicating with the FaroArm®, ScanArm®, Design ScanArm, or FARO® Gage. If so, save work in open programs or files and close them.
  2. Turn off and disconnect the FaroArmfrom any Ethernet, USB, wireless, or Bluetooth computer connection.
  3. On the computer, go to Start > Control Panel > Programs > Programs and Features. It may take a few seconds for the programs list to appear.
  4. Browse the list to find the FaroArm USB Driver <#>.
  5. Write down the number that appears in the Version column on the right.
  6. Right-click on the driver name, click Uninstall, and click Yes in the next two windows. The driver is removed from the program list.
  7. Click to close the Control Panel, then go to the Start Menu to Restart the computer.
  8. Go to Install the New Driver to continue.

Install the New Driver

  1. Before you begin this procedure, ask your IT department to temporarily disable antivirus software on the computer you use with the FaroArm®, ScanArm®, Design ScanArm, or FARO® Gage. Antivirus software may cause the driver installation software to fail when extracting the driver files.
  2. On the computer, navigate to where you saved the FaroArm USB Driver .exe file. Write down the four decimal-place version number at the end of the file name (x.x.x.x).
  3. Double-click the file and when the window appears, click Yes to allow the installation to continue.
  4. In the wizard window, select the language the wizard should use, then click Next in this and the next window. This installation process begins. This might take a few minutes depending on your processor speed.
  5. When the installation is complete, click Finish.
  6. Go to the Start menu to Shutdown the computer.
  7. Connect the FaroArm®, ScanArm®, Design ScanArm, or FARO® Gage to the computer using an Ethernet, USB, wireless, or Bluetooth connection and turn on the FaroArm.
  8. Start the computer. You should see a message in the system tray stating the driver was successfully installed.
    If the new hardware wizard appears, select This Time Only, then Recommended Options and click Finish.
  9. Go to Confirm Results to continue.

Confirm Results

Check that the FaroArm USB Driver appears in the Control Panel.

  1. Go to Start > Control Panel > Programs > Programs and Features. It may take a few seconds for the programs list to appear.
  2. Browse the list to find the FaroArm USB Driver <#> and notice that the number in the Version column has changed to be the same as the one at the end of the new driver's file name.
  3. Click to close the Control Panel.

Your device is ready to use.

Troubleshooting

  • If the number in the Version column did not change, repeat the steps in these procedures starting with Uninstall the Existing Driver.
Back to top

Quick Steps

Uninstall the Existing Driver

Uninstalling the driver removes it from Windows leaving the driver file on the hard disk--just in case you may need it in the future.

  1. Ensure that there are no applications open that may be communicating with the FaroArm®, ScanArm®, Design ScanArm, or FARO® Gage. If so, save work in open programs or files and close them.
  2. Turn off and disconnect the FaroArmfrom any Ethernet, USB, wireless, or Bluetooth computer connection.
  3. On the computer, go to Start > Control Panel > Add or Remove Programs. It may take a few seconds for the programs list to appear.
  4. Browse the list to find the FaroArm USB Driver<#>.
  5. Right-click the driver, click on Click here for support information, and write down the version number.
  6. Click to close the Support Info window, and in the Add or Remove Programs window, click the Remove button on the right.
  7. In the window, click Yes to remove the driver. The driver is removed from the program list.
  8. Click to close the Control Panel windows, then go to the Start Menu, click Turn Off and Restart.
  9. To continue, go to Install the New Driver.

Install the New Driver

  1. Before you begin this procedure, ask your IT department to temporarily disable antivirus software on the computer you use with the FaroArm®, ScanArm®, Design ScanArm, or FARO® Gage. Antivirus software may cause the driver installation software to fail when extracting the driver files.
  2. On your computer, go to the desktop where you saved the FaroArm USB Driver file. Write down the four decimal-place version number at the end of the file name (x.x.x.x).
  3. Double-click the file and when the window appears, click Yes to allow the installation to continue.
  4. In the wizard window, select the language the wizard should use, then click Next in this and the next window. This installation process begins. This might take a few minutes depending on our processor speed.
  5. When the installation is complete, click Finish.
  6. Go to the Start Menu to Turn Off the computer.
  7. Connect the FaroArmto the computer using an Ethernet, USB, wireless, or Bluetooth connection and turn on the FaroArm
  8. Start the computer. If the new hardware wizard appears, select This Time Only, then Recommended Options and click Finish.
  9. To continue, go to Confirm Results.

Confirm Results

Check that the FaroArm USB Driver appears in the Control Panel.

  1. Go to Start > Control Panel > Programs > Add or Remove Programs. It may take a few seconds for the programs list to appear
  2. Browse the list to find the FaroArm USB Driver <#>, right-click on the driver, click on Click here for support information, and notice that the Version number has changed to be the same as the one at the end of the new driver's file name.
  3. Click to close the Control Panel.

Your device is ready to use.

Troubleshooting

  • If the number in the Version column did not change, repeat the steps in these procedures starting with XP--Uninstall the Existing Driver.
Back to top

See Also

Keywords:

reinstalling, reinstall, re-install, updating, update, LLP driver, Laser Line Probe driver, OS, operating system, download, latest driver, current driver, newest driver, new driver, earlier driver, past driver, old driver

Important Information for Insight Pro Customers

Click on the button below to download 'Distributor' Offline tool for Insight Pro.

Edge Fusion Software Issues

*This offline tool is an option available for Insight Pro owners. Use Distributor to upload/export your stock file and load your custom tunes, from a 3rd party dealer of your choice, to your Insight Pro Part Numbers 86000 and 86100.

**Please Note: Currently, the Distributor software will not work on any Mac computers.*

DataViewer software

Edge Fusion Software Won't Update

DataViewer
This software for Windows allows you to open OBD-II Data Logs that you recorded with an Edge monitor.
Updated: 2019-3-28
Version: 3.4.3.1
Compatibility: Windows





broken image
PreviousNext
Cookie Use
We use cookies to improve browsing experience, security, and data collection. By accepting, you agree to the use of cookies for advertising and analytics. You can change your cookie settings at any time. Learn More
Accept all
Settings
Decline All
Cookie Settings
Necessary Cookies
These cookies enable core functionality such as security, network management, and accessibility. These cookies can’t be switched off.
Analytics Cookies
These cookies help us better understand how visitors interact with our website and help us discover errors.
Preferences Cookies
These cookies allow the website to remember choices you've made to provide enhanced functionality and personalization.
Save